Summary of Testing

Argon Filled Insulated Glass: Also Available in Triple Glass

regular glass: 4 / 16 / 4 mm laminated security   glass: 6 / 16 / 6 mm insulated impact: 10 / 12 / 6 mm    10 / 12 / 10 mm

• Depending on Glass:

U-Factor: 0.17 – 0.55 SHGC: 0.18 – 0.55 VLT: 0.43 – 0.61 R-Value: 3.7 - 5.9

• Florida Approval Numbers      6244, 6253, and 7047      www.floridabuilding.org

• Large Missile Impact Tested:      WINDOWS AND DOORS WITH INSULATED IMPACT GLASS WERE TESTED:           AAMA 101 ASTM E-1886, ASTM E-1996      WINDOWS AND DOORS WITH EXTRUDED SHUTTERS WERE TESTED:           AAMA 1302.5-76; ASTM E283-91; ASTM E331.93; ASTM E330-91

6-0 x 8-0 Double Door Description

Specifics: System Height: 96.00" | System Width: 72.00" | Test Date: November 16, 2005
AAMA101 Test Results:	Air: Pass     0.02 Water: Pass     12 psf Structural: Pass     70 ± FER: Pass
ASTM E-1996 Test Results:     Large Missile Impact Testing	Impact: Pass
ASTM E-1886 Test Results:      Cyclic Testing	Positive: Pass     65 ± Negative: Pass     65 ±

3-0 x 8-0 Single Door Description

Specifics: System Height: 96.00" | System Width: 36.00" | Test Date: November 16, 2005
AAMA101 Test Results:	Air: Pass     0.004 Water: Pass     15 psf Structural: Pass     80 ± FER: Pass
ASTM E-1996 Test Results:     Large Missile Impact Testing	Impact: Pass
ASTM E-1886 Test Results:      Cyclic Testing	Positive: Pass     75 ± Negative: Pass     75 ±

3-0 x 8-0 Sidelite Description

Specifics: System Height: 96.00" | System Width: 36.00" | Test Date: November 16, 2005
AAMA101 Test Results:	Air: Pass     0.000 Water: Pass     15 psf Structural: Pass     75 ± FER: Pass
ASTM E-1996 Test Results:     Large Missile Impact Testing	Impact: Pass
ASTM E-1886 Test Results:      Cyclic Testing	Positive: Pass     75 ± Negative: Pass     75 ±

8-0 x 5-0 Picture Window Description

Specifics: System Height: 60.00" | System Width: 36.00" | Test Date: November 16, 2005
AAMA101 Test Results:	Air: Pass     0.000 Water: Pass     15 psf Structural: Pass     80 ± FER: Pass
ASTM E-1996 Test Results:     Large Missile Impact Testing	Impact: Pass
ASTM E-1886 Test Results:      Cyclic Testing	Positive: Pass     75 ± Negative: Pass     75 ±

8-0 x 5-0 Picture Window Description

Specifics: System Height: 72.00" | System Width: 72.00" | Test Date: November 16, 2005
AAMA101 Test Results:	Air: Pass     0.000 Water: Pass     15 psf Structural: Pass     80 ± FER: Pass
ASTM E-1996 Test Results:     Large Missile Impact Testing	Impact: Pass
ASTM E-1886 Test Results:      Cyclic Testing	Positive: Pass     75 ± Negative: Pass     75 ±

4-0 x 6-0 Single Window Tilt & Turn Description

Specifics: System Height: 72.00" | System Width: 48.00" | Test Date: March 20, 2006
AAMA101 Test Results:	Air: Pass     0.03 Water: Pass     9.75 psf Structural: Pass     70 ± FER: Pass
ASTM E-1996 Test Results:     Large Missile Impact Testing	Impact: Pass
ASTM E-1886 Test Results:      Cyclic Testing	Positive: Pass     70 ± Negative: Pass     70 ±

8-0 x 6-0 Double Win. Mulled Tilt & Turn Description

Specifics: System Height: 72.00" | System Width: 96.00" | Test Date: March 20, 2006
AAMA101 Test Results:	Air: Pass     0.03 Water: Pass     9.75 psf Structural: Pass     65 ± FER: Pass
ASTM E-1996 Test Results:     Large Missile Impact Testing	Impact: Pass
ASTM E-1886 Test Results:      Cyclic Testing	Positive: Pass     60 ± Negative: Pass     60 ±

8-0 x 6-0 Double Win. Tilt & Turn-Turn Description

Specifics: System Height: 72.00" | System Width: 96.00" | Test Date: March 20, 2006
AAMA101 Test Results:	Air: Pass     0.12 Water: Pass     9.75 psf Structural: Pass     65 ± FER: Pass
ASTM E-1996 Test Results:     Large Missile Impact Testing	Impact: Pass
ASTM E-1886 Test Results:      Cyclic Testing	Positive: Pass     65 ± Negative: Pass     65 ±

8-0 x 7-0 Double Win. Mulled Tilt & Turn with Transom Description

Specifics: System Height: 84.00" | System Width: 96.00" | Test Date: March 20, 2006
AAMA101 Test Results:	Air: Pass     0.28 Water: Pass     9.00 psf Structural: Pass     60 ± FER: Pass
ASTM E-1996 Test Results:     Large Missile Impact Testing	Impact: Pass
ASTM E-1886 Test Results:      Cyclic Testing	Positive: Pass     60 ± Negative: Pass     60 ±

Vinyl Fixed Window w/ Extruded Shutter

Air Infiltration      @ 1.57 psf	ASTM E283091	Measured    .08 cfm/ft²	Allowed    .34 cfm/ft²
Water Resistance      @ 10.5 psf Water Test Pressure	ASTM E331-93	Passed
Uniform Static Air Pressure      @ 90 psf Positive Passed      @ 90 psf Negative Passed	ASTM E330-91	Passed
Large Missile Impact @ 50 ft per sec.      8’ x 9 lbs. 2" x 4" southern yellow pine		Passed
Cyclic Fatigue Loading      ± 671 Cycles per S.F.B.C.		Passed

Tilt and Turn Vinyl Window w/ Extruded Shutter

Air Infiltration      @ 1.57 psf	ASTM E283-91	Measured    .02 cfm/ft²	Allowed    .34 cfm/ft²
Water Resistance      @ 10.5 psf Water Test Pressure	ASTM E331-93	Passed
Uniform Static Air Pressure      @ 75 psf Positive D/R      @ 82.5 psf Negative	ASTM E330-9    D/R    D/R	Passed
Large Missile Impact @ 50 ft per sec.      8’ x 9 lbs. 2" x 4" southern yellow pine		Passed
Cyclic Fatigue Loading      ± 671 Cycles per S.F.B.C.	AAMA 1302.5-76	Passed
Forced Entry Resistance	AAMA 1302.5-76	Passed

Technical Description

System: Profile testing in accordance with RAL quality symbol G 716/1.

Material: Multiple-chamber profile of hard PVC in accordance with DIN 7748, frame material accordance to DIN 4108, profile depth 70 mm, outer wall thickness 3 mm.

Reinforcement: Galvanized steel, thickness 1.5 mm, in frame and sash in all window sizes.

Seals: External seal and inside seal APTIK (EPDM)* material, continuously bonded: glass seal in the glass strip, miter cut from APTK (EPDM)*.

*APTIK - EPDM The abbreviation APTK stands for ethylene propylene terpolymer rubber;the international name is EPDM (ethylene propylene dienne terpolymers). The material has found more and more uses recently, including sealing elements for windows and doors.

Drainage: Front chamber drainage is added according to regulations. The glass is also ventilated in a manner that allows it to retain its insulating properties.

Hardware: Intruder resistant hardware is used for all sizes of windows and doors. In standard production, the fittings are attached through two partitions (corner mounts and sash fittings are screwed into steel) making them even more resistant to prying or breaking open.

Quality: Certified in accordance with DIN EN ISO 9001.

Certified Testing Laboratories, Inc. Orlando Florida: Windows and Shutters were tested. Test: METRO DADE COUNTY PA 201-94, PA 202-94 and PA 203-94 Uniform Static Air Pressure: ASTM E 330-91 up to 187.5 MPH.